Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Forced take over

Status
Not open for further replies.

avayabrain

Technical User
Apr 8, 2008
117
CA
We have a Main server and backup server and 5 ess. Main server lost control of Port networks and backup took
control of all Port networks.

We need to manually make Main server take control os all PN.

I know we need to run command "get forced-takeover ipserver-interface all" from main server.

Is there anything else we need to do? any other commands?

how do we test if all is good after take-over and it is succesful?(status ESS port network ?)

any other tests required?

CM 4.0 and s8720...


 
perform a "list ips" This will give you the status of all IPSI boards.
 
Another way to check to see if the main server is comtrolling the gateway is to do a list conf port x (or all)

If it shows all the boards then it's controling the 650, if it says "no board" then the GW is being controlled by the ESS.

RTMCKEE

CM 2.1.1
Prologix R9.05
Modular Messaging 1.1
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top