Follow me activation by MML command?

[posta]

Is it possible to activate follow me service with
MML command to MD110 instead of pressing *21*number#
on the telephone?

 

[rfpui]

Hi
Not possible by MML command
If this extension is a system extension (KS) look to:
thread806-933520

And it is possible from operator console

 

[whosrdaddy]

if you have BC11 or BC12 and extension is generic (cordless,ip,...) you can use GEPEI command to activate follow me

--------------------------------------
What You See Is What You Get

 

[posta]

Tnx, Rfpui!

I have looked Thread 806,933520.
There isn't Function Test command FTSAS on BC.9 system :-(

Thanks any way!

 

[rfpui]

Hi
After send FTSAS have you response COMMAND UNKOW?
FTSAS is not described in Alex

 

[posta]

Silly me ;-)
I checked documentation 1st.

Yes, there is in BC.9 too.

What are measure of precaution before I send
this commands?

I am gooing on leave next week so I'll postpone
action for 7 days.

 

[rfpui]

I have Alex libraries from BC 9 to 12.1 and this command was never described.
I thing that this method is not dangerous

 

[TRIDENT100]

Hi
This is not dangerous. There are many commands that not are listed in Alex

/* Trident*/

 

[asuvp]

The commands are changed to SGxxx, (Signal Generator)
but *NOTE* the data in the signal are probably
changed, so take care!!!

 

[posta]

I have try this on BC.9 cni 85, and it works OK.
What about BC.9 cni 76? It doesn't work.
Any suggestions?!

 

[gelgedgem]

hi Posta
what command to activate this features,

thanks in advance