Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Finding Startalk DN
- Thread starter enet
- Start date
- Thread starter
- #3
It usually says "Set XXX" XXX being the digits of the vm DN. For instance on my Flash I do a Feature 985 and it says "set 269" so my forward no answer DN would be 269.
If it is just saying "set" with no digits after it then perhaps it is not connected to a working station port. Double check that there is a line cord coming from underneath the Flash and ending in a station port jack. Your DN should be that station DN. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
If it is just saying "set" with no digits after it then perhaps it is not connected to a working station port. Double check that there is a line cord coming from underneath the Flash and ending in a station port jack. Your DN should be that station DN. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
