Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Find IP OFFICE Hardware Version
- Thread starter Centit
- Start date
IP500 or IP406? Both are written on the back of the hardware
IP500V2 has a SD card.
For IP406V2 with PCS6 and higher has 64mb or RAM and is able to go to R6
So more info would be great.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
IP500V2 has a SD card.
For IP406V2 with PCS6 and higher has 64mb or RAM and is able to go to R6
So more info would be great.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
I recall, PCS8 and higher.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
And if you're lucky then a PCS7, this can be checked from the SysMon tool, look for FreeMem=3XXXXXXX it's a 64Mb, if it says 1XXXXXXX then you have 16Mb
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
- Thread starter
- #5
![[dazed]](/data/assets/smilies/dazed.gif "[dazed] [dazed]")
Telecomboy
Programmer
The front of the control unit also says either "IP Office 500 V2" if it's a V2. The older IP500 just says "IP Office 500".
If you have a Backup of the config then you can see it in the Manager.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
- Thread starter
- #8
Thanks all I looked at the unit in the rack from the back and it says IP OFFICE 500 on the sticker. It also has a CF card slot and no SD slot. So I am assuming its the original V1.
Does anyone know if this will still support V8 of the IP Office software? I know the new IP Pro Voicemail card is 500 V2 only , from what I have read.
Does anyone know if this will still support V8 of the IP Office software? I know the new IP Pro Voicemail card is 500 V2 only , from what I have read.
Telecomboy
Programmer
IP 500 is supported on V8. and yes, the new vmpro card will only work on V2.
- Status
Similar threads