Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FDN amount of rings

Status
Not open for further replies.

kattr11

MIS
Jan 15, 2008
74
US
Option 61

Is there a way to change the amount rings before x410 FDN or HUNTS to x515? Right now it rings three times and they would like it to ring 4 or 5 before hunting.

TN listed below

REQ: prt
TYPE: tnb
TN 24 0 1 0
DATE
PAGE
DES

DES 0
TN 024 0 01 00
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 410 0 MARP
AST NO
IAPG 0
HUNT 515
TGAR 1
LDN 0
NCOS 4
SGRP 0
RNPG 12
LNRS 16
XLST
SCI 0
CLS UNR DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWA RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTA SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR SCC 0032
FTR PHD
FTR FDN 515
FTR EFD 515
FTR EHT 515
DATE 9 APR 2008
 
MORE THAN 4 RINGS

It's cofigured via the RCO (0, 1 or 2)prompt on the set.
The RCO prompt is related to the CFN0, CFN1, CFN2 and the DFN0, DFN1, DFN2.
If CFN2 and DFN2 are configured with a 9 and your set has configured with RCO 2 your phone is going to your voicemail after 9 rings

CFN0
CFN1
CFN2
DFN0
DFN1
DFN2

Are configured in LD 15 RDR datablock

Mato' Was'aka
 
>ld 15
CDB000
MEM AVAIL: (U/P): 611891 USED: 92620 TOT: 704511
DISK RECS AVAIL: 454
REQ: chg
TYPE: rdr

TYPE RDR_DATA
CUST 0
OPT
FNAD
FNAT
FNAL
CFTA
CCFWDN
CFN0 6
CFN1 6
CFN2 6
DFN0 6
DFN1 6
DFN2 6
DNDH
MDID
NDID
MWFB
TRCL
DFNR
CRTOD

this will change the rings from 3 to 6 like here , but it will have the same effect on the whole system
 
0,1,2 of CFN/DFN do not have to ALL match, and it does not have to be system wide.

Mato' Was'aka
 
Verify what all your sets are set to because when you make any chg in the CDB , you change it for every set that has that match. I never make all mine the same.

TYPE RDR_DATA
CUST 0
OPT
FNAD
FNAT
FNAL
CFTA
CCFWDN
CFN0 6 mine is 2
CFN1 6 mine is 4
CFN2 6 mine is 6
DFN0 6 mine is 2
DFN1 6 mine is 4
DFN2 6 mine is 6
DNDH
MDID
NDID
MWFB
TRCL
DFNR
CRTOD





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Thank you! All of your responses helped me greatly.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top