Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

fax to email via pri,mics,nam

Status
Not open for further replies.

swfl

Technical User
Nov 16, 2007
114
US
is there any solution to receive a fax through a pri to mics and nam to an outlook inbox, or any other way to make this happen?
 
How about feeding it to an analog terminal adapter to a fax machine that has email built into it? let the Fax machine send it out as an email via a network connection.

Or, you could front end that box with a Media Gateway, allowing for SIP trunks rather than a standard PRI- the cost savings on the trunks probably would pay for the hardware.

Or, how about the customer getting a separate Efax number that is outside the PBX, or possibly a call forward to an Efax.
 
Or desk top messaging. This is the Nams Unified messaging.
 
Would that readable from the inbox without having to send it to a printer?
 
I usually use pbx2sip's first suggestion.

DID to ATA to cust equip. No need to involve the NAM.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top