Hi all ... I've been using this site as a resource as I'm new to Nortel, and you guys and gals are geniuses, as far as I'm concerned. I'm looking forward to actually contributing!
To the issue: Anyone know the trick to using a fax machine connected to the data port on a M2008 set? I've already considered simply splitting the jack, but that would create even more of a mess in the tiny space this is connected to and now I'm curious. I want to make it work.
Here's the TNB:
REQ: prt
TYPE: tnb
TN 4 0 8 15
DATE
PAGE
DES
DES SALES
TN 004 0 08 15
TYPE 500
CDEN 4D
CUST 0
DN 5794 0 MARP
CPND
NAME Adventure Center
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 5600
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 6
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFA WTA THFD FNA HTD ONS
LPR XRD CWA (ACTIV) SWD PUA MWA LPA XHD CCSA-CSI LND TVD
CFTA SFA MRA C6D CNIA CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHA OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
SHL ABDD CFHA
USRD BNRD OCBD RTDD FAXD PGND FTTC
RCO 1
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 16
FTR FDN 5600
FTR EFD 5600
FTR EHT 5600
DATE 19 MAR 2009
To the issue: Anyone know the trick to using a fax machine connected to the data port on a M2008 set? I've already considered simply splitting the jack, but that would create even more of a mess in the tiny space this is connected to and now I'm curious. I want to make it work.
Here's the TNB:
REQ: prt
TYPE: tnb
TN 4 0 8 15
DATE
PAGE
DES
DES SALES
TN 004 0 08 15
TYPE 500
CDEN 4D
CUST 0
DN 5794 0 MARP
CPND
NAME Adventure Center
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 5600
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 6
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFA WTA THFD FNA HTD ONS
LPR XRD CWA (ACTIV) SWD PUA MWA LPA XHD CCSA-CSI LND TVD
CFTA SFA MRA C6D CNIA CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHA OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
SHL ABDD CFHA
USRD BNRD OCBD RTDD FAXD PGND FTTC
RCO 1
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 16
FTR FDN 5600
FTR EFD 5600
FTR EHT 5600
DATE 19 MAR 2009