Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fatal Error message, what can resolve this other than?

Status
Not open for further replies.

bhanson184

Technical User
Jan 3, 2003
250
US
Periodically this error comes in:
FATAL VCU ERROR COUNT = 1

TYPE SLOT CHNL PRIO DATE TIME #BAD DATA1 DATA2 DATA3 DATA4
08 08 00 3 11/19 10:23 1 00000000 000000FF 00000000 00000000
It says to replace the VCU card and reboot. Are there other options available? Reboot first and see if the trouble continues?
 
Hi Mr. Hanson

This fault does not deal with the VCU, but the harddisk (HDD). Try to check your HDD by entering the command:
@DEX 1
Then post the result here.
In the printout zeroes (0) means OK sector, and numbers (1-9) means bad sectors.


///doktor
 
Do NOT restart your OCTEL before I have seen and commented your printout from the @DEX 1...


///doktor
 
The restart is a different system. I'll get back into this Octel and send the results.
 
Hey doctor;

Here is the results of the command you said to input:

@DEX 1
REGION 01 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000
With all zeros does that mean there isn't a problem with the drive?

Bob H
 
I was to quick on my response. Here is the rest of the results:

@DEX 1
REGION 01 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000

REGION 02 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000

REGION 04 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000

REGION 08 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000

REGION 10 COMPLETE DISK #1: 00000 DISK #2: 00000 DISK #3: 00000

DISK EXERCISE COMPLETE

Thanks
 
Yes, zeroes means OK sector.
If you clear the alarms by @C H and list them again by @L H, and the TYPE 08 alarm comes back after one day or earlier there could be a problem with the HDD.
If the @DEX 1 is clear, then I would restart the system.

///doktor
 
Still, if the DEX 1 is clear it is not 100% shure, that the system wold come up after a @RESTA. Other faults (software or hardware) could keep the system down after a restart.
So, we cannot give any guarantee.
But if you check the @L H and @DEX 1 before, you are safer.

///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top