Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Event Veiwer Error - Unable to map error code 1797 2

Status
Not open for further replies.

drphat

IS-IT--Management
Mar 22, 2001
100
US
Ok..in my event viewer i have this error that pops up periodically...

4/2/2001 -- 11:21:26am -- Server -- NONE -- 2510 -- N/A -- Computer

inside it states: The server service was unable to map error code 1797

P3 - 600
256MB
SP6a
NT 4.0
 
Hi,

Check this link:
//support.microsoft.com/support/kb/articles/Q242/1/17.ASP


Yoosif Alnatur
tsp1yba@ups.com
 
I have the exactly same problem. The above link 2828 mentioned seems not working. I tried to search by article number Q242 given in the link. Microsoft database can not find either...?
 
Never mind. Found the following article numbers from Microsoft knowledge base: Q165082 and Q242117.
 
CAUSE:
This behavior can occur if the server does not have that specific printer driver loaded. Because of this, the printer driver is unknown.

RESOLUTION:
To resolve this issue, install the printer driver on the client workstation from the printer driver installation disk.

Yoosif Alnatur
tsp1yba@ups.com
 
Event ID 2510: The Server Service Was Unable to Map Error Code 1797

--------------------------------------------------------------------------------
The information in this article applies to:

Microsoft Windows NT Server version 4.0

--------------------------------------------------------------------------------


SYMPTOMS
When you try to copy a cross-platform printer driver from a Microsoft Windows NT Server 4.0-based server to a client computer (for example, a Microsoft Windows 95-based client), you may receive the following error message in Event Viewer:

Event ID: 2510
Source: Server
Type: Error
Category: None

The Server service was unable to map error code 1797.



CAUSE
This behavior can occur if the server does not have that specific printer driver loaded. Because of this, the printer driver is unknown.



RESOLUTION
To resolve this issue, install the printer driver on the client workstation from the printer driver installation disk.



MORE INFORMATION
For information about installing cross-platform printer drivers, please see the following articles in the Microsoft Knowledge Base:

Q154291 Installing Cross Platform Print Drivers in Windows NT 4.0

Q142667 How to Share a Windows 95 Printer Driver in Windows NT 4.0

Yoosif Alnatur
tsp1yba@ups.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top