ERROR DURING DUMPING OF CIL DATA

[michelepin]

Hi all,

i got this errors from my BC11 SP13:

CLASS: 3
75 ERROR DURING DUMPING OF CIL DATA
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2 INF3
24AUG17 10:35:35 2 1 SIP 002-2-63-00 29 2 3 1

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
24AUG17 10:35:42 3 1 CLOP 004-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
24AUG17 10:36:17 5 1 CLOP 014-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
24AUG17 10:36:44 6 1 CLOP 002-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
24AUG17 10:39:43 7 1 CLOP 012-*-**-** 2

I've checked SIU card at 2-2-63-00, trying to restart and changing it with another working SIU but none, errors still there.

Any help really appreciated !

Thanks, Michele


--
BLOG @

http://www.zerozone.it

 

[snor]

Hi,
problem seem not to be on your SIU-board or MD110.
Please check the equipment, connected to SIU.

75 Error during dumping of CIL data
ADD INFO 1: 1 = Faulty SIU board.
2 = Faulty equipment.
3 = Error during the buffer transmission to the SIU board.
ADD INFO 2: Faulty individual.
ADD INFO 3: Initiating LIM (only applicable if it is a buffer transmission error).

best regards,
Norbert

 

[snor]

P.S.
use command EDFIP; (will show you the status of files and device)

 

[michelepin]

<EDFIP; FILE ADMINISTRATION
FILE STATE DEV DEVICE STATE PRIO
SMDR ACT
SI-0 SIU SYSTEM BLOCKED C
END

<

--
BLOG @

http://www.zerozone.it

 

[michelepin]

After further checks, while trying to get CDR via FTP, i got:

* Connected to xxxxx port 21 (#0)
< 220 172.16.41.187 pSOSystem FTP server (NTL68K/1.0.4) ready.
> USER xxxx
< 331 Password required for xxxx
> PASS xx
< 230 User xxx logged in.
> PWD
< 550 4.0/
> PASV
* Connect data stream passively
* ftp_perform ends with SECONDARY: 0
< 227 Entering Passive Mode
* Hostname was NOT found in DNS cache
* Trying xxx...
* Connecting to xxx port 1031
* Connected to xxx port 21 (#0)
> TYPE I
< 200 Type set to I.
> SIZE cab
< 550 cab: system error.
> RETR cab
< 150 Opening BINARY mode data connection for cab.
* Maxdownload = -1
* Getting file with size: -1
* Remembering we are in dir ""
< 226 Transfer complete.
> DELE cab

There's a way to cleanup/fix this issue ?

Michele


--
BLOG @

http://www.zerozone.it