Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERR020 on loop 24 0 0

Status
Not open for further replies.

ntcnctek

IS-IT--Management
Mar 4, 2008
51
US
I was experiencing ERR5417 on 24 0 0 11 and 15. This was an analog card but there was nothng on unit 11. I moved all the units that were on 24 0 0 and moved them to loop 12. That cleared the ERR5417 but now I am getting ERR020 on 24 0 0. I tried to out the card but it tells me that it is unequiped. ANy suggestions would be helpful.
 
the 5417 looks like corruption.. but it's a strange error for analog.. and that would explain the err 20.. that;s the ghost of the problem... i would new cardslt 24 0 0, then edd, then ini then take the card out...

john poole
bellsouth business
columbia,sc
 
I agree that it might be corruption. I had another loop 12 which was corrupted during upgrade but was cleared by Nortel. I currently have a ticket opened and am working on a problem with handsets going to speakerphone automatically. I have raised the question to Nortel that this may be linked but we are now in our 3rd week and are still gathering capture files.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top