Enabling new DID's in dialing Plan

[AlphaG33k]

We recently bought a new batch of DID's, however, when I do a prt ludn they are not entered in there. How to I enable new DID's in to our dialing plan?

Thanks in advance,

Luke
IT2 USCG

 

[phonz1]

either they are already used or you may be converting 4 digit to 3??? in LD 20, PRT, DNB, put a new DID in and what does it show??

 

[AlphaG33k]

Of course if I do a LD 20 PRT DNB nothing is going to print. They arent in the dialing plan yet they arent under PRT LUDN they need to be added in somehow or just enabled. I dont know where to go to enable them.

Thanks anyway

 

[phonz1]

no, all of the numbers are in the software, prt a dnb of one of your new ones, what does it show. You don't have to enable them!

 

[acewarlock]

AlphaG33k:
If you do a LUDN and and post it here we will try to explain it to you.


All DN's are already in the systen and you don't turn them on, you just program them to a phone.

Until you program it to a phone, it won't show up in the DNB.

 

[AlphaG33k]

Here is the prt ludn, there are a bunch of numbers missing out of there that arent programmed anywhere though, also there are no numbers past 7900 series and I know we dont have any numbers programmed past that. However, the new DIDs we got are 8300 series and thats why I can program them they arent showing up in this list.

Thanks
Luke

REQ: prt
TYPE: ludn
CUST
DN

CUSTOMER 00 - UNUSED DNS:
1009 1015 1019 1026 1028 1029 1037 1041 1042 1043
1045 1046 1047 1048 1049 105 106 107 1080 1087
1089 109 1100 1103 1105 1106 1107 1108 1115 1116
1117 1118 1119 1120 1121 1122 1123 1124 1130 1131
114 1150 1164 1165 1166 1167 1168 1169 117 118
1190 1191 1192 1193 1194 1195 1196 1197 1198 120
121 1220 1221 1223 1224 1225 1226 1227 1228 1229
1230 1231 1232 1235 1236 1237 1239 124 125 126
127 128 129 13 14 1501 1502 1503 1504 1505
1506 1507 1508 151 152 153 154 155 156 1570
1572 1573 1574 1575 1576 1577 1578 1579 158 159
160 161 1620 1621 1622 1623 1624 1625 1626 1627
1628 163 164 165 166 167 168 169 17 18
19 205 206 207 208 209 210 211 2120 2122
2124 2125 2126 2127 2128 213 2140 2141 2142 2144
2145 2146 2147 2148 2149 215 216 217 218 219
220 221 222 2230 2231 2232 2233 2234 2235 2236
2237 2238 224 225 226 227 228 229 23 24
2538 2582 2598 2602 2604 2653 2695 27 28 29
3000 3001 3002 3003 3004 3005 3006 3007 3008 301
302 303 304 305 306 3070 3071 3072 3074 3075
3076 3077 3078 3079 308 309 310 3110 3111 3112
3113 3114 3115 3117 3119 312 313 314 315 316
317 318 319 32 330 331 332 3335 334 335
336 3376 3379 3380 3384 3385 3386 3387 339 34
350 3510 3511 3512 3513 3514 3515 3516 3517 3519
352 353 354 355 356 357 358 359 36 37
384 385 386 387 388 389 39 40 4105 4106
4107 4108 4109 411 412 413 414 415 416 417
418 419 42 430 431 432 433 434 4350 4351
4352 4353 4354 4355 4356 4358 4359 436 437 438
439 44 45 46 4718 472 473 4744 4747 4748
4749 4750 4751 4752 4753 4757 4759 4794 48 490
491 492 493 494 495 496 497 498 4990 4991
4992 4993 4994 4995 4996 4997 5002 5003 5004 5005
5006 5007 5008 5009 501 502 5030 5031 5034 5035
5036 5037 5038 5039 504 505 506 5074 5075 5076
5077 5078 5079 52 53 54 5525 5526 5527 5528
5529 5530 5532 5533 5534 5535 5536 5537 5538 554
5550 5571 5572 5573 5574 5575 5576 5577 5578 5579
558 559 5601 5602 5603 5604 5605 5606 5607 5608
5609 561 562 563 564 5650 5651 5652 5653 5654
5656 5657 5658 5659 566 5671 5672 5673 5674 5675
5676 5677 5678 5679 568 569 57 58 5970 7001
7002 7003 7004 7005 7006 7007 7008 7009 7010 7011
7013 7014 7015 7016 7017 7019 7022 7023 7024 7025
7026 7028 7030 7031 7032 7033 7034 7036 7037 7038
7039 704 705 706 7071 7072 7073 7074 7075 7076
7077 7084 7088 7090 7093 7094 71 72 73 74
750 751 7552 7553 7554 7555 7556 7557 7558 7559
756 757 758 759 76 770 771 772 773 774
775 776 7770 7771 7772 7773 7774 7775 7776 7778
7779 778 779 78 7904 7964 #0 #6 #7 #8
#9

CUSTOMER 01 - UNUSED DNS:
1 2 3 4 5 6 7 8 9


REQ:

 

[bigindian65]

Any number not there IS in use or programmed somewhere. Do the world a favor, program a set as 8300 and then look at your 83XX range.

 

[tnjwinters]

What number do you dial to get an outside line. If it's 8 then all the numbers from 8000 to 8999 are unavailable. In LD 20 if you prt dnb of 8, what do you get?

 

[AlphaG33k]

Here is what I get when I try to program a 8300 number.

CFTN 20 1 5 0
DES TMPLT

*** MAKE PRINTER READY ***
TN 20 1 4 7
DN 8340
SCH3300
DN !
>err sch3300
>

SCH3300
"The DN or Position ID is invalid, it must be unique."

Severity: Info

 

[AlphaG33k]

tnjwinters your right, I am an idiot. I didnt even think about it. To get a long distance trunk we dial 8.

 

[tnjwinters]

So that number is either and AC1 or AC2. Print the dnb of 8 and it will tell you what it's programmed as.

 

[AlphaG33k]

Yep, AC2. So would I have to change our NARS table?

REQ: prt
TYPE: dnb


CUST
DN 8
DATE
PAGE
DES

CUST 00


DN 8
TYPE NARS
NTBL AC2

CUST 01


NACT

 

[tnjwinters]

Yep, you could change your AC2 to a two digits, say 85 and that would free up all 8000 to 8499 and 8600 to 8999 numbers.

 

[AlphaG33k]

Great, thats not going to go over to well with the command, but hey what else can I do.

Thanks for all the help.
Luke

 

[tnjwinters]

There are other options. You could see if there is a better range of numbers available. Other guys on the forum might have a better idea of how to handle the current numbers you have.

 

[bigindian65]

I'd shoot for another block of DIDs, their cheap. Looks like a lot available in the 4xxx series, 42, 45, 46. Hopefully avalable.

 

[phonz1]

the 8300 range shows up in customer 1, I'd bet you are logged in to customer 0

 

[johnpoole]

jumping in late.. you only need on ac code.. that may free up the 8.. if not you have two options, one is use an idc for every did, the other is to request a block of did's that match you vacant numbers for that customer

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Thats why we asked you to prt the DNB for the numbers you wanted to use, would have saved hours.

 

[MagnaRGP]

I think you are now stuck with creating an IDC table for each of the new DID's. This way you can map the 83XX number to any existing DN.

My advice would be to try to map the DID as closely as possible. for example:

User DN =X300, then the DID that you map in the table would be IDGT 8300 CDGT X300 and so on for each of your new block.

Not the prettiest method, but easier than trying to teach your trained monkeys....errrr....end users how to dial 9 1 etc for long distance than 8 1 etc.