Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

emg 100 Offnet Forward

Status
Not open for further replies.
rsatech

rsatech

Programmer
Sep 5, 2013
30
ZA
After setting up offnet fwd via a speed dial, I require the original callers number to be displayed on the received mobile phone, I am using SIP Trunks. Has anyone had experience with this before. Your assistance would be appreciated
 
Sort by date Sort by votes
Hi,

From a working system,
Capture_c6rsfd.jpg


C64
 
Upvote 0 Downvote
hi,

The fixed table entry in 133 needs to reference the main pilot for the sip trunk. You could also try changing the From/Contact ID to SYS ATD. Are you sure the carrier will accept 'A party passthrough'. It may be that you are now passing it through and they are rejecting it. What error message do you see in a packet capture from the system? You should also be able to see the numbers being sent in the sip headers.

C64
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

tecdigi
  • Locked
  • Question
SCHEMATIC PSU LDK-100 HELP
Replies
0
Views
164
tecdigi
tecdigi
tecdigi
  • Locked
  • Question
PSU LG LDK-100 SCHEMATIC HELP..
Replies
0
Views
208
tecdigi
tecdigi
JWNS
  • Locked
  • Question
LG LDK 100 Help!
Replies
4
Views
241
Antoniojhone
Antoniojhone
francosileno
  • Locked
  • Question
emg 80 problem html
Replies
1
Views
78
martinhodge
martinhodge
JWNS
  • Locked
  • Question
LG LDK 100 PC Admin
Replies
3
Views
230
Evgen_y
Evgen_y

Part and Inventory Search

Sponsor

Back
Top