emg 100 Offnet Forward

[rsatech]

After setting up offnet fwd via a speed dial, I require the original callers number to be displayed on the received mobile phone, I am using SIP Trunks. Has anyone had experience with this before. Your assistance would be appreciated

 

[cody64]

Hi,

From a working system,

C64

 

[rsatech]

Hi Cody64 thank you for the support, its just when I use your above setup the Offnet stops working altogether. Is there anything else that requires changing with your setup

 

[cody64]

hi,

The fixed table entry in 133 needs to reference the main pilot for the sip trunk. You could also try changing the From/Contact ID to SYS ATD. Are you sure the carrier will accept 'A party passthrough'. It may be that you are now passing it through and they are rejecting it. What error message do you see in a packet capture from the system? You should also be able to see the numbers being sent in the sip headers.

C64