We have a CX400 that we are implementing using solaris 8 as the host. We bind 2 luns and when we run format on our host we now have an extra device for lun id 0 . Why? Is this normal and we are looking at it to detail
Here is an example
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> kens
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@1,0
2. c4t0d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@4,2000/fibre-channel@1/sd@0,0
3. c4t1d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@4,2000/fibre-channel@1/sd@1,0
4. c4t1d1 <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pci@4,2000/fibre-channel@1/sd@1,1
5. c5t0d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@6,2000/fibre-channel@1/sd@0,0
6. c5t1d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@6,2000/fibre-channel@1/sd@1,0
7. c5t1d1 <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pci@6,2000/fibre-channel@1/sd@1,1
8. emcpower0a <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pseudo/emcp@0
9. emcpower1a <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pseudo/emcp@1
Specify disk (enter its number):
Any help would be great
Kreg
Here is an example
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> kens
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@1,0
2. c4t0d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@4,2000/fibre-channel@1/sd@0,0
3. c4t1d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@4,2000/fibre-channel@1/sd@1,0
4. c4t1d1 <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pci@4,2000/fibre-channel@1/sd@1,1
5. c5t0d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@6,2000/fibre-channel@1/sd@0,0
6. c5t1d0 <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pci@6,2000/fibre-channel@1/sd@1,0
7. c5t1d1 <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pci@6,2000/fibre-channel@1/sd@1,1
8. emcpower0a <DGC-RAID5-0205 cyl 32766 alt 2 hd 4 sec 16>
/pseudo/emcp@0
9. emcpower1a <DGC-RAID5-0205 cyl 32766 alt 2 hd 32 sec 10>
/pseudo/emcp@1
Specify disk (enter its number):
Any help would be great
Kreg