thread690-1183465 - nothing in this thread helps me...but the problem is similar. All settings are configured but when I activate ec500, and test call that station, only that station rings - nothing happens on the cell. Trace does have any attempt towards the cell phone. Thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EC500 Not Working
- Thread starter imdue
- Start date
Do you have mapping set to BOTH?
STATION
Extension: 6123 Lock Messages? n BCC: 0
Type: XMOBILE Security Code: * TN: 1
Coverage Path 1: COR: 4
Name: My Xmobile Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
XMOBILE Type: EC500 Message Lamp Ext: 6123
Display Module? y Message Waiting Type: ICON
Display Language: english Length of Display: 12x3
Mobility Trunk Group: ars Calls Allowed: all
Configuration Set: 1
CELL PHONE NUMBER MAPPING
Dial Prefix:
Cell Phone Number: 5551234567
Mapping Mode: both
STATION
Extension: 6123 Lock Messages? n BCC: 0
Type: XMOBILE Security Code: * TN: 1
Coverage Path 1: COR: 4
Name: My Xmobile Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
XMOBILE Type: EC500 Message Lamp Ext: 6123
Display Module? y Message Waiting Type: ICON
Display Language: english Length of Display: 12x3
Mobility Trunk Group: ars Calls Allowed: all
Configuration Set: 1
CELL PHONE NUMBER MAPPING
Dial Prefix:
Cell Phone Number: 5551234567
Mapping Mode: both
- Thread starter
- #3
- Status
Similar threads
- Question
- Locked
- Question
