Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DT820 ITY-8LDX-1 (BK) Tel Firmware

Status
Not open for further replies.
Johnny Mourani

Johnny Mourani

Technical User
Mar 7, 2024
7
LB
Hi ,

i recently got 10 DT820 ITY-8LDX-1 (BK) Tel from ebay and they came with Standard SIP Licenses.

I have a SV9100 PBX and licences for IP DT Terminal.
So i need the NEC firmware on these phones.

Could someone please share the firmware and tell me how to upload them to the phones ?
Thank you.

Email : johnny.mourani@ais.edu.lb

 
Sort by date Sort by votes
Dear Belevedere ,

Thanks for your response.
But i have nothing on my email.
Checked junk also.
Can you recheck please.

Thank you
 
Upvote 0 Downvote
I sent you a link to a couple of zip files.



There are 10 kinds of people in the World.

Those that understand Binary and those that don't.
 
Upvote 0 Downvote
Thank you a lot.

the firmware worked perfectly and i have now 10 working phones.

Much appreciated.
 
Upvote 0 Downvote
Hi Johnny

Would you please inform me the way in details because i have the same problem and i got the files from belevedere (Thanks to him) ?
Always phone dont accept the flash (FW not allowed)
 
Upvote 0 Downvote
I am also in need of the firmware for this phone. I have a whole suite of phones that have a new firmware that just won't connect to my server. Its newer than the existing firmware so I hope to downgrade the firmware.
 
Upvote 0 Downvote
@Adam.Gallant You probably need to create a post related to your problem. The firmware that Johnny Mourani got was the NEC SIP firmware to convert the NEC SIP from Standard SIP.

adelnooh problem ended up being his phones were from a market that would not allow the install of the NEC SIP firmware. He needs the firmware NEC SIP for the phone for that market.

You state the phone will not connect to your server but give no details on what server etc you are using.

A separate post with more details might get some good answers .
 
Upvote 0 Downvote
Sorry folks. I'm a bit of a n00b with this. We have an SV9100. Purchased 15 phones thru ebay, all the same model as the ones we use now. The firmware is newer on these phones...more options. I have broken down the menu in a Google Doc. My existing phones operate on v3.0.1.0. These new ones are on a much higher one with crisper images on the display. Our configuration authenticates based on the MAC of the phone to the ext in the SV9100. I'm not sure if this is common or not, but it works great ensuring we have the correct phone with the correct ext.

The menu layout:
Menu Layout
  1. Personal Directory
    1. unavailable
  2. Call History
    1. Missed Calls
    2. Received Calls
    3. Placed Calls
    4. Delete
  3. User Settings
    1. Ringtone
    2. Headset
    3. Language
    4. Tone Volumes
    5. Date/Time
    6. LCD Settings
    7. Clear Settings
  4. Admin Settings
    1. Network Settings
      1. DHCP Mode - Enable
      2. IP Address -
      3. Subnet Mask -
      4. Default Gateway -
      5. Primary DNS Server -
      6. Secondary DNS Server -
      7. Boot Server
        1. Server Address
        2. Server port
        3. Protocol
        4. Username
        5. Password
        6. Source Preference
        7. File Transfer Timeout
      8. SNTP
        1. Server Address
        2. GMT Offset

  1. Syslog
    1. Server Address
    2. Server Port
    3. Trace Level
  2. Advanced Settings
    1. LAN Port Settings
      1. Speed & Duplex
      2. VLAN Tagging
      3. VLAN ID
      4. Quality of Service
      5. VLAN Priority
    2. PC Port Settings
      1. Speed & Duplex
      2. VLAN Tagging
      3. VLAN ID
      4. Port Available
    3. LLDP Mode
    4. 802.1x settings
    5. RTCP-XR Metrics
    6. VPN Client
      1. VPN Mode
      2. VPN Gateway Address
      3. VPN Network Settings
      4. IKE Settings
      5. Child SA Validity
      6. NAT Traversal
        1. Keep Alive
        2. NAT Traversal Port
      7. L2TP Settings
        1. Username
        2. Password
  1. Sip Settings
    1. Line 1
      1. Account Name
      2. Display Name
      3. Registrar
        1. Server Address
        2. Server Port
      4. Outbound Proxy
        1. Server Address
        2. Server Port
      5. Authentication
        1. Username
        2. Password
    2. SIP Transport
      1. UDP or TCP (UDP)
    3. Register Expiry
      1. 300s
    4. Message Waiting
      1. Disable or Enable (Disabed)
    5. Subscription Expiry
      1. 3600s
  2. Maintenance Settings
    1. Reboot Phone
    2. Data Clear
    3. EHS Headset
  3. Security
    1. Telnet
      1. Disable or Enable (Enabled)
    2. Admin Password
  4. Application Settings
    1. Push Server
      1. Push Server Access
        1. Disable or Enable (Disabled)
      2. Server IP Address

  1. Reboot Phone
  2. Status
    1. Terminal Info
      1. NEC STD SIP 4.1.33.26
      2. MAC F8-B7-97-E0-55-77
      3. Terminal File Version 1.3.24
      4. License Gigabit Ethernet Enable
      5. License 16 Line Key Enable
      6. License 32 Line Key Disable
      7. Hareware Version 9.5.2.1
    2. Network Info
      1. DHCP Mode Enabled
      2. IP Address
      3. Subnet Mask
      4. Default Gateway
      5. Primary DNS Server
      6. Secondary DNS Server
      7. SNTP Server Not Available
      8. GMT Offset -6.0
      9. Call Control QOS 48
      10. Voice QOS 46
      11. Syslog Server Address Not Available
      12. Syslog Server Port 514
      13. Boot Server Address Not Available
      14. Boot Server Port Not Available
      15. Boot Server Protocol Not Available
      16. Speed and Duplex (LAN) Port Down
      17. VLAN ID (LAN) 2
      18. VLAN Priority (LAN) 6
      19. Speed and Duplex (PC) Port Down
      20. Home URL Not Available
      21. 802.1x Status Disabled
      22. 802.1X EAP Method Disabled
      23. 802.1x ClientCert Validity Not Available
      24. 802.1x ClientCert Subject Not Available
      25. 802.1x ClientCert Issuer Not Available
      26. 802.1x ClientCert Filename Not Available
      27. 802.1x RootCert Validity Not Available
      28. 802.1x RootCert Subject Not Available
      29. 802.1x RootCert Issuer Not Available
      30. 802.1x RootCert Filename Not Available
      31. RTCP-XR Metrics Reporting Disabled
      32. RTCP-XR Collector Address 0.0.0.0:5060

  1. SIP Info
    1. Account Name: Unavailable
    2. Current Registrar 5060
    3. Current Outbound Proxy 0.0.0.0:5060
    4. Register Expiry 300
    5. Max Calls 4

  1. VPN Info
    1. VPN Connectiobn State Disconnected
    2. VPN Mode Disabled
    3. VPN IP Address 0.0.0.0
    4. IKE Authentication Mode PSK
    5. IPsec NAT Traversal Port 4500
    6. VPN ClientCert Validity Not Available
    7. VPN ClientCert Subject Not Available
    8. VPN ClientCert Issuer Not Available
    9. VPN ClientCert Filename Not Available
    10. VPN RootCert Validity Not Available
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
NEC SV8100 firmware
Replies
5
Views
615
SV9100
SV9100
Sam1070
  • Locked
  • Question
Firmware and PC Pro
Replies
9
Views
712
Sam1070
Sam1070
H
  • Locked
  • Question
NEC DT900 ITK-6D-1P Non NEC SIP Firmware
Replies
2
Views
461
Hussam_Refai
H
Midhun123
  • Question
NEC DT700 STANDARD SIP FIRMWARE 1
Replies
19
Views
2K
TMAAC-LLC
T
adelnooh
  • Locked
  • Question
How to return to NEC firmware
Replies
4
Views
333
Saeidnec
Saeidnec

Part and Inventory Search

Sponsor

Back
Top