Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DST Not working??? 5

Status
Not open for further replies.

voippbx

Programmer
Jun 6, 2006
238
US
I changed 6 pbx's last night at 9pm to update the march 8 increment 1 hour at 2 am. This morning only 1 took? When going back in and doing a 'set time' the pbx was still 1 hour off on 5 pbx's?

I am set to type: daylight savings with rule 1 being the march 8 to Nov 1?

Why did 1 work and 5 not? Am I missing something????
 
Mine didn't take either; I had to disable the synch with the time server. See this notice from Avaya.

Susan
"Opportunity is missed by most people because it is dressed in overalls, and looks like work." - Thomas A. Edison
 
I was able to get the time to sync simply by changing the Timezone and then changing it back, when logged in through the maintenance webpage of CM 3.1.2 on my S8710's I checked the time and it was show EST, so I knew that something was screwy so I changed the time zone from US/Eastern to US/Pacific then back to US/Eastern and the time updated to EDT. Hope this helps folks that are trying to avoid installing yet another patch. I did this on Sunday and everything is still holding, we are using NTP.
 
Same here on four different systems. Also once I get the system time correct the phones are not updating. I have the system parameters to the system to update the station display set to yes.

 
Set it to no then set to y to give it a kick in the pants

Hope this helps
ED

1a2 to ip I seen it all
 
make sure the locations dst rule matches the set time dst rule
 
Our phones sets are not updating either. Can you tell me where you are finding the field to set update station display? Thanks!
 
It's under "display system-parameters features" on about the 7 or 8 page - System Updates Time On Station Displays? y
 
Thank you! Thank you! Our phones are finally updated. Our System Updates Time on station display was set to N. Also we had a 0 in the rule for change locations. Since I updated these, the phones have slowly started to update.
 
i'm just glad i could help. you guys have bailed me out in the past.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top