DSCP Marking

[spanton]

Hi

We are currently running a CS1000E Rls 6.0, Cisco Nexus data core.

The question I have is the default settings of the phone is that control packets will be marked with DSCP 40, and media with DSCP 46. However when I look at the phone, both of these values are set to 0.

How is the phone advise of these DSCP markings?

 

[rstew3]

The phones get their DSCP config from the QOS Configuration Section of the Node Configuration in Element Manager. By default, layer 3 QOS is enabled with those values with layer 2 COS as an option.

 

[rstew3]

The phones get their DSCP config from the QOS Configuration Section of the Node Configuration in Element Manager. By default, layer 3 QOS is enabled with those values with layer 2 COS as an option.

 

[spanton]

I see that the markings are set on the sig server. However the settings on the phones are both 0. Am I missing something?