Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
drive comm error
- Thread starter TechyG
- Start date
Drive comm error is usually an issue with the serial comms link between the drive and library controller.
1. First try re-seating the tape drive.
2. Get the drive and/or library up to latest firmware if either are downlevel.
3. This is the most likely: the drive has an internal problem causing it to stop responding to the library controller, and the drive will need changed.
1. First try re-seating the tape drive.
2. Get the drive and/or library up to latest firmware if either are downlevel.
3. This is the most likely: the drive has an internal problem causing it to stop responding to the library controller, and the drive will need changed.
- Thread starter
- #3
Is this connected to a windows server? You may need to disable the TUR (test unit ready) function in the OS. I have seen this wreck havoc on a tape library. The system / drives are so busy trying to respond to the TUR that it hangs. Google the solutions on how to disable the test unit ready function in windows.
Andy
Andy
- Status
Similar threads
