Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DPNSS between Mitel 3300 and Ericson 110

Status
Not open for further replies.

Mitelpassion

IS-IT--Management
May 2, 2005
1,153
ZA
HI, i've configured a DPNSS link between a Mitel 3300 and Ericson 110, using an embedded E1 card and software running release 7.1UR2.

Calls between the two systems work but when I dial either way, only the number shows on the display of either phone and not the name. I've checked the COS of the DPNSS trunk and the phone. Can't really see anything other than the Display ANI/DNIS etc options. Have all these turned on.

Also features like callback and campon do not work. Has anyone done a succesful integration with all features working yet?

regards,
E
 
Hello,

The name field of the Ercison isn't the same field as the Mitel, these fields are vendor specific info elements.

If you link to Mitels (MN3300 or SX200) with DPNSS then this info is transparant.

But with other vendors some features are not working.

Use the CCS trace command to check the DPNSS message from the Ericson wich info is send to the MN3300.

Succes,

Fred
 
Have you contacted Mitel support? There's a couple of patches out there for DPNSS/Q.SIG links to Ericsson switches that address name display and feature issues.
 
nope, will have to do that soon.
the ericson guy is also having a look on his side.

thanks for the input
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top