DPNSS between Mitel 3300 and Ericson 110

[Mitelpassion]

HI, i've configured a DPNSS link between a Mitel 3300 and Ericson 110, using an embedded E1 card and software running release 7.1UR2.

Calls between the two systems work but when I dial either way, only the number shows on the display of either phone and not the name. I've checked the COS of the DPNSS trunk and the phone. Can't really see anything other than the Display ANI/DNIS etc options. Have all these turned on.

Also features like callback and campon do not work. Has anyone done a succesful integration with all features working yet?

regards,
E

 

[FRDO]

Hello,

The name field of the Ercison isn't the same field as the Mitel, these fields are vendor specific info elements.

If you link to Mitels (MN3300 or SX200) with DPNSS then this info is transparant.

But with other vendors some features are not working.

Use the CCS trace command to check the DPNSS message from the Ericson wich info is send to the MN3300.

Succes,

Fred

 

[Lundah]

Have you contacted Mitel support? There's a couple of patches out there for DPNSS/Q.SIG links to Ericsson switches that address name display and feature issues.

 

[Mitelpassion]

nope, will have to do that soon.
the ericson guy is also having a look on his side.

thanks for the input