Door Phone on 5.0 Embedded VM

[jco9715]

I have a door phone on a IPO 500 running 5.0. I am looking for a way to have the phone disconnect and not go to a voicemail when it rings no anwser. Any idea's.

 

[TomMills]

turn the voicemail off?

"There's a dog in the New Zealand section

 

[amriddle01]

Make a shortcode in the doorphones user shortcodes with the feature "Dial Physical Extension by Number" that should stop it going to voicemail I think


ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[jco9715]

I can't do that due to the fact that it is setup as a ring down line. So if VM is Off it will just keep ringing.

 

[Bas1234]

On the user turn off voicemail, and goto;

System > Telephony > Tones and Music tab > tick local busy tone.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[amriddle01]

Ring down line?

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[Bas1234]

He means a Hotline i guess.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[jco9715]

Correct. Sorry bout the confusion

 

[Bas1234]

If the "local busy tone" like above is not working, try to add t(1) in the hotline code.

t(1) this will limit the connection to 1 minute.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________