Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Don't work AutoChanger

Status
Not open for further replies.

vkirichenko

IS-IT--Management
Mar 28, 2006
18
0
0
UA
I have strimer AutoChanger HP 460 but I can not understand why networker 7.3 don't autimatic change type in a drive. I have a license AutoChanger unlimit slot.
How to solve problem?
 
Sorry, but i can not understand your message. Once assigned, NW will never change the device type. What do you want to do?
 
I write to to type without problem - but if type is end (FULL) networker don't change type in changer (library) and I have error on client (TimeOut ...). Why ? and what I must to do?
 
OK - little typo - you mean 'tape', not 'type'.

What to do - no idea without more infos.
- Did you define the jukebox at all?
- Do you have another media in the same pool?
- can you provide more info?
 
I define jukebox as a tape library
no I have not another media in a default pool
I label slots from 1 till 7, slot 8 - clean tape
I add register license AutoChanger to Networker 7.3
But when I fill first slot changer not change tape in drive on another.
What infos do you want to see?
 
What is the output of "nsrjb" ?
 
Jukebox HP@16.0.0: (Ready to accept commands)
slot volume pool barcode volume id recyclable
1: dl380g4_1.024 Default 11352335 no
2: dl380g4_1.025 Default 4289542564 no
3: dl380g4_1.026 Default 4272765506 no
4: dl380g4_1.027 Default 4255988411 no
5: dl380g4_1.028 Default 4239211338 no
6: dl380g4_1.029 Default 4222434235 no
7: dl380g4_1.030 Default 4205657185 no
8: Cleaning Tape (50 uses left) - -
*not registered in the NetWorker media data base

drive 1 (\\.\Tape1) slot 1: dl380g4_1.024 (mounted)
 
This is Windows. Are you sure that the Removable Storage Manager Service is disabled?
 
O.K. - I know that NW 7.3 will not allow you to configure a jukebox when RSM is enabled. But i have also seen other situations. For instance, in case of an upgrade.

What does the command "mminfo -m" show as result?
 
C:\>mminfo -m
state volume written (%) expires read mounts capacity
dl380g4_1.024 3840 KB 0.1% 7/7/2007 0 KB 4 200 GB
dl380g4_1.025 0 KB 0% undef 0 KB 0 200 GB
dl380g4_1.026 0 KB 0% undef 0 KB 0 200 GB
dl380g4_1.027 0 KB 0% undef 0 KB 0 200 GB
dl380g4_1.028 0 KB 0% undef 0 KB 0 200 GB
dl380g4_1.029 0 KB 0% undef 0 KB 0 200 GB
dl380g4_1.030 0 KB 0% undef 0 KB 0 200 GB


Fill drive was relabled.
 
O.K. - where is the full tape you mentioned?
 
Do you have the parameter "Auto media management" set to "Yes"
(Autochanger / Edit / Preferences)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top