Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DND problem

Status
Not open for further replies.
basboers

basboers

Technical User
Oct 14, 2005
21
NL
Is it possible to set a IP-Dterm on DND and send the incomming call to an opperator.
On this moment the caller hears a busy tone.

thank u very much.
 
Sort by date Sort by votes
Wouldn't it be easier to just set a call forward all to the operator?
 
Upvote 0 Downvote
However for a system wide setting in Cmd 5110 de tennant number de E600 will produce the desired effect.
 
Upvote 0 Downvote
and if it's not a true console but a dterm acting as a console .

try 5110>tenant number>extn or pilot number to forward to.


Regards,

Dr VuDu
 
Upvote 0 Downvote
We had done that all but it still didn't work.
The problem was 08>240> it was set to 0 it had to be 1

thanx for all your support

greetzz..Bas
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lausa
  • Locked
  • Question
DND
Replies
1
Views
79
belevedere
belevedere
hcmbmt
  • Locked
  • Question
SV9500 - DND from Front Desk terminal doesn't work
Replies
1
Views
108
hcmbmt
hcmbmt
IT_Wannabe
  • Locked
  • Question
NEC SL1000 phone directs straight to voicemail - seemingly No Ring, No DND or forwarding on
Replies
7
Views
732
IT_Wannabe
IT_Wannabe
Pocopelo
  • Locked
  • Question
power failure problem
Replies
10
Views
489
Pocopelo
Pocopelo
Hichamis88
  • Locked
  • Question
Sl2100 inmail problem
Replies
4
Views
268
Hichamis88
Hichamis88

Part and Inventory Search

Sponsor

Back
Top