Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DN not hunting on 2616 with multiple DN/SCR

Status
Not open for further replies.

matept

MIS
Mar 5, 2012
12
US
Hello all,
I have a 2616 set that is not acting the way I thought it would. It is part of an ACD queue, and everything there works as expected. The manager wanted this particular user to also have a DID. I have added the SCR to another key (which happens to be the third SCR on the phone) and that works as expected. The problem is the when the the set is busy, the new DID does not hunt to our CallPilot.

Print outs of the set in question:

DN
REQ: prt
TYPE: dn
TYPE DNB
CUST 0
DN 3783
DATE
PAGE
DES

DN 3783
CPND
NAME *********
XPLN 26
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 019 0 00 14 KEY 11 MARP DES 0 17 MAY 2012
(2616)


NACT


TN
REQ: prt
TYPE: tn
TYPE TNB
TN 19 14
DATE
PAGE
DES

DES 0
TN 019 0 00 14
TYPE 2616
CDEN 8D
CUST 0
AOM 0
ERL 0
FDN 3499
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU 0000
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXD ARHD FITD CNTD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC MCBN
CDMR MCDD T87D PKCH
CPND_LANG ENG
RCO 0
HUNT 3499
LHK 5
PLEV 02
DANI NO
SPID 6250
AST
IAPG 0
AACS NO
ITNA NO
DGRP
PRI 01
MLWU_LANG 0
DNDR 0
KEY 00 ACD 3740 0 6205
SUPY ACID 6250 KEY 38
01 ADL 16
02 MSB
03 TRN
04 DWC 3740
05 SCR 3605 0 MARP
CPND
NAME ***********
XPLN 26
DISPLAY_FMT FIRST,LAST
06 AO6
07
08 MCR 3700 0
CPND
NAME SPANISH
XPLN 26
DISPLAY_FMT FIRST,LAST
09 XMWK 3499 3700
10 ADL 16 ###36
11 SCR 3783 0 MARP
CPND
NAME ********
XPLN 26
DISPLAY_FMT FIRST,LAST
12 SSU 0000
13 PRK
14 CFW 4
15 MWK 3499
DATE 17 MAY 2012


NACT
AUD000


The SCR on key 05 hunts and works as expected. The MCR on 08 functions as expected. It is the SCR on 11 that does not hunt to our CallPilot on 3499.

Any help would be appreciated.

Thanks
 
When you say it does not Hunt to 3499, our question is "When it is busy and you call it, what DOES it do"? Busy, error message in CP, ring into a black hole?

IF it is getting a busy signal, set LHK=15. It isn't supposed to matter, but I think that might fix it.

Find more at GHTROUT.com
 
GHTROUT, It has a busy tone.

KCFLHRC, and GHTROUT, I will set the LHK to 11 and see if that helps.

Thank you,
 
Okay. I changed the LHK to 11.

My next question is this.

Is there a way to make it so the user can be 'Busy' in the ACD queue, but not bust on the DID?

Thank you
 
If the ACD user is on an ACD call then the DID call should still ring in. If the user is in NRD the DID call will still come in. If the user is in MSB then neither the ACD or DID call will come in.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top