Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Distinctive Ringing

Status
Not open for further replies.

mjwald

Technical User
Feb 26, 2009
83
US

I am trying to get per line distinctive ringing on a bunch of 2008's. I have started with a single phone.

I added CLS DRDA, this gave me the new prompts DNRO and DRNI. I have set DRNI to 4, I think I have tried all 0-4 at this point.
The phone still rings as CLS DRG is set. I have all the PKGs that are required per the NTPs. Not really sure where to go at this point.

On this phone I am working with DN 7555.



TN 008 0 09 01
TYPE 2008
CDEN 8D
CTYP XDLC
CUST 0
MRT
ERL 0
FDN 0
TGAR 0
LDN NO
NCOS 4
SGRP 0
RNPG 19
SCI 0
SSU 0000
XLST
SCPW
CLS UNR FBD WTA LPR PUA MTD FNA HTD ADD HFD
MWD LMPN RMMD AAD IMD XHD IRD NID OLD VCE DRG3
POD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNIA CDCD MSID DAPD BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDA
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTU MCBN
CDMR PRED RECD MCDD T87D SBMD
PKCH CROD ELCD
CPND_LANG ENG
RCO 0
HUNT
PLEV 02
PUID
UPWD
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 6179 0
DNRO 0
DNRI 0
CPND
NAME bob
XPLN 20
DISPLAY_FMT FIRST,LAST
01 SCR 5500 0
DNRO 0
DNRI 0
CPND
NAME ted
XPLN 10
DISPLAY_FMT FIRST,LAST
02 TRN
03 RNP
04 SCR 7555 0
DNRO 0
DNRI 4

05
06
07
DATE 31 AUG 2015
 
The print out you posted looks very odd. Where is the MARP at?
 
There are multiple phones with these lines. This phone does not happen to be the marp for any of them.
 
never tried it before, this would be the first one. I tried the phone on my desk first, could not get that one to do it either, however it is an IP phone, so I thought I would give it a go on a old 2008.

 
Thus I tried it on the 2008. Any thoughts?
 
What release software and are the patches current?
 
Here is your issue

Distinctive Ringing by DN does not support Multiple Appearance DNs. Therefore, each
appearance of a DN configured on a different set cannot be configured to allow different ringing
cadences.
 
OK, so what about

DN 7555 rings as cadence 4 on 5 phones
and DN 5500 rings cadence 2 on the same 5 phones
and their prime DNs ring whatever DRG is set to.

Would that work?

FYI we are 7.62, I think the patches are current, if not they are darn close.

 
The book is pretty clear when it says it will not work with Multiple Appearance DN's. So in simple terms, if 5000 appears on more than 1 set it wont work for that DN, seems pretty clear to me. So in your scenario it will never activate the distinctive ring because you are trying to use it with MADN's
 
You bet, get your hands on a Feature Guide, they are invaluable when it comes to knowing how a particular feature works and hot to program it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top