IdRatherBFishing
Technical User
- Feb 7, 2012
- 4
I am able to connect to a Mitel 3000 locally w/ a USB to DB-9 converter and the V24 cable. However shortly after connecting the connection is dropped and I have to log back in again.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disconnected from local connection to Mitel 3000
- Thread starter IdRatherBFishing
- Start date
- Status
DomingoDolores
Programmer
Do you have the right driver installed for this specific USB-2-DB9 adapter?
Make sure you have the right settings:
Baud rate: 9600
Data bits: 8
Parity: none
stop bits: 1
had this before with the wrong driver/settings installed.
follow me on twitter:
Make sure you have the right settings:
Baud rate: 9600
Data bits: 8
Parity: none
stop bits: 1
had this before with the wrong driver/settings installed.
follow me on twitter:
- Thread starter
- #3
IdRatherBFishing
Technical User
- Feb 7, 2012
- 4
Another co-worker had mentioned the driver. I have installed the update. Will check the system ASAP.
- Status
Similar threads
- Locked
- Question