DISA setup

[BumgarCN]

I am trying to setup a disa DN. I have entered all data in LD 24. When I call the DN I get a fast busy. Is there something I missed? Here is what LD 24 looks like.
REQ PRT
TYPE DIS
CUST 0
DN XXXX

CUST 0
DN xxxx
SCOD
AUTR NO
TGAR 1
NCOS 6
COS UNR
RANR NONE
DGTS NONE

There is no security yet because I just want to get it working before I add another variable to the mix. Any help is appreciated.

 

[hawks]

DISA is for remote access so I'm not sure if you can just dial the DN to test. What happens if you assign a DID to it?

 

[BumgarCN]

It worked from outside. Good call. I didn't even think of that. I thought since the DN was designated as DISA it wouldn't matter if it was dialed from inside or out. That's what I get for thinking!
I appreciate the input.

 

[cmassjohn]

Nortel were removing DISA package from switches on upgrade at one stage (at least in Europe), so not sure if it'll disappear over time.

IP softphones secured over a VPN for remote access is an alternative to DISA.

Shouldn't be that many problems with DISA if properly configured (secured).

J.


Senior Engineer, cmass

http://www.cmass-ni.com