Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Digital Phones issue on CS1000

Status
Not open for further replies.

wilsonj16

Vendor
Mar 22, 2016
5
US
I have a CS1000 running 7.5. On 2 separate occasions now i have had an entire card of digital sets become unresponsive. i cannot IDU any of the sets, i can IDC the card. the resolve was to disable the card, unseat and reseat it, and then all is well...i have to think that something bigger is going on here. anyone else experience this?
 
If it was the same card both times I would suspect the card.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
no, if it were only that easy! my hopes when it happened the first time,were that it was the card, but this was a different card in a different loop, 8.1.4 and 64.1.3
thanks
 
I know this sounds like an Avaya response, but do you have a card that it is not happening on, and maybe you can swap the card to see if the problem follows the card, or stays on the slot?

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Just a thought - how's the grounding? Any new major pieces of equipment added to the building recently?

I've see electrical noise cause some weird things to happen - like cards disabling for no reason.
 
the old IPE columns have been in forever, i think 01. the ground has not been touched since install. the odd part is the card doesnt disable, and i get no alarm. the only way i know it happened is when i get a couple users call in with dead sets. hasnt happened since, but i have to wonder if and when its going to rear its head again...
we upgraded to CS1000 in 04, so all network connectivity to the old stack goes through the customers cisco switches. maybe something weird on the network side?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top