Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Digit translation on a Nortel Option 61C 3

Status
Not open for further replies.

chuck0965

Vendor
Oct 27, 2006
9
US
Is it possible to translate *11 to 3368 on a Nortel Option 61C. Our CEO has requested that we use *11 as an emergency number.
Thanks.

Charles
 
If *1 isn't already used then maybe. My guess is *1 is used already though so that would be a conflict with *11. Typically the * is used for Flexible Feature Codes.
 
yes it is possible,

first check if *1 is used as a ffc

then create a pldn *11 assign it to the lsno which dials 3368
 
Another way might be to create an ACD queue to do the same thing as shown below using a number starting with a "*"

>LD 23
REQ NEW
TYPE ACD
CUST 0
ACDN *28
MWC
DSAC
MAXP 1
SDNB
BSCW
ISAP
RGAI
ACAA
FRRT
SRRT
NRRT
FROA
CALP
ICDD
NCFW 9911
FNCF
CWTT
HMSB
ACPQ
FORC
RTQT
SPCP
OBTN
RAO
CWTH
NCWL
BYTH
OVTH
TOFT
HPQ
OCN
OVDN
IFDN
OVBU
EMRT
MURT
RTPC
NRAC
RAGT
DURT
RSND
FCTH
CRQS
IVR
OBSC
OBPT
CWNT

REQ



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Thank you all for your replies.

Everything I'm trying I get a sch code that states there is a dn conflict.
The only * I have located is a FFC cprk *, which I thought was a wildcard and not the actual asterisk(*). Am I wrong in my assumption?

Thank you again for the assistance.

 
So that would be a conflict. * would conflict with * followed by anything. * is not a wild card.
 
Yes * is listed as a DN for cprk.
Since there is a conflict, I'll tell the boss we can't use *11.

thanks Guys!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top