MacLeopard
IS-IT--Management
Hello! First I'd like to apologize very much for asking so many questions. This is my first Meridian unfortunately (which is why I'm setting it up in a home environment rather than setting it up for a business my first time and risking accidentally messing up their phone system).
Anyway, my Meridian KSU will allow 6 lines and 16 extension phones. This is what my line setup will be (all VoIP lines, but in the Meridian's eye, it doesn't know that):
Line 1: Unlimited calling plan to US/Canada. Fair international rates so international calls should be routed over this line when available.
Line 2: Prepaid calling plan
Line 3: Prepaid calling plan
Line 4: Prepaid calling plan
Line 5: Prepaid calling plan
Line 6: Prepaid calling plan
What I want the Meridian KSU to do is route over line 1 whenever it is possible. For example:
No lines are currently in use.
Now, Joe picks up his phone and proceeds to dial 9 (AC1) for an outside line. Joe receives dialtone from line 1 and dials his call normally.
While Joe is on the phone, Mary picks up her phone and dials 9 (AC1) to reach an outside line. Line 1 is currently in use, so her call is routed over Line 2.
5 minutes after Mary is on her conversation, Joe is off the phone. Now, Jane picks up her phone to make a call, and dials 9 (AC1) and receives dialtone from line 1. She makes her call.
In other words: If Line 1 is available, it should be used. Is there a "priority line" feature?
I also might be getting an unlimited calling plan on Line 2. Is there a way to add that as a second priority line if I do that?
TIA,
ML
Anyway, my Meridian KSU will allow 6 lines and 16 extension phones. This is what my line setup will be (all VoIP lines, but in the Meridian's eye, it doesn't know that):
Line 1: Unlimited calling plan to US/Canada. Fair international rates so international calls should be routed over this line when available.
Line 2: Prepaid calling plan
Line 3: Prepaid calling plan
Line 4: Prepaid calling plan
Line 5: Prepaid calling plan
Line 6: Prepaid calling plan
What I want the Meridian KSU to do is route over line 1 whenever it is possible. For example:
No lines are currently in use.
Now, Joe picks up his phone and proceeds to dial 9 (AC1) for an outside line. Joe receives dialtone from line 1 and dials his call normally.
While Joe is on the phone, Mary picks up her phone and dials 9 (AC1) to reach an outside line. Line 1 is currently in use, so her call is routed over Line 2.
5 minutes after Mary is on her conversation, Joe is off the phone. Now, Jane picks up her phone to make a call, and dials 9 (AC1) and receives dialtone from line 1. She makes her call.
In other words: If Line 1 is available, it should be used. Is there a "priority line" feature?
I also might be getting an unlimited calling plan on Line 2. Is there a way to add that as a second priority line if I do that?
TIA,
ML