Dialing out on single line ata phone.

[coolheavychevy71]

using a ata for a single line phone. How do you program it to access a outline by dialing 9 also what do you dial to access the page.

Old Norstan techs ride on!!!

 

[MooreTel]

For the line out, you have to give that extension access to a line pool.

To Page:
Phones only F611
Speakers only F62
Phones & Speakers F631

 

[Bob3470]

Use the Feature codes MooreTel said then to access a Feature from an analog set you would use a link and *


3
jerryreeve (Vendor) 21 May 02 09:26
For the most part with ATA's what you do for accessing features is first flash the analog phone (norstar calls this link) then dial * followed by the feature code. so for a transfer to another extension flash * 7 0 ext hangup. for a centrex/outside line transfer flash * 7 1 number hangup (or flash * 7 1 for an outside confrence.
JerryReeve
Communications Systems Int'l
com-sys.com

 

[curlycord]

Here is my method for ATA...

ATA
Lince Access
-2 Intercoms
-Line Pool Access X = y
-Prime line = Pool X

Capabilities
-Hotline = External
---External # : enter F78 (pause)
---use prime line

So when you go off hook it grabs the line pool, a pause is entered and ready for you to dial number.

As for paging:
Link/Flash then * then the codes as MooreTel mentions.

Example
Link/Flash then * then 611 for sets in zone 1

In other words Link (or Flash) followed by * (star) = the FEATURE button.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[coolheavychevy71]

Thanks fellows. Got the page to work already. Will work on the dial nine access later. Again Thanks....

Old Norstan techs ride on!!!

 

[MooreTel]

Assigning a Hotline is fine IF it's always using a line for a external call such as a fax. If on the other hand, you sometimes need to use the intercom, don't assign a Hotline. By default whatever you assign as a Prime Line, it'll still be Intercom (unless there's a Hotline assigned).

 

[curlycord]

Yes sorry I had fax in my head last night.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca