Dial wait time in CM

[TOPBAY]

Hi friends,

Asterisk Example: Dial with 30 second timeout (default 45 sec)
same => n,Dial(SIP/1234567,30)

FreeSwitch Example: Dial with 30 second timeout (default 60 sec)
<action application="set" data="originate_timeout=30"/>

For CM, what is the default timeout in second and which parameter can you change?

Thanks for your help in advance!

 

[TOPBAY]

I should have asked "what is default value of 180 Ringing timeout in sec?"
In Asterisk it keeps ringing 45 sec and sends CANCEL to end ringing. You can change by the parameter.
In FreeSwitch it is 60 sec by default. You can change by the parameter.
How about Avaya CM?
Thanks for your help !!

 

[jimbojimbo]

Check the Alternate Route Timer on your signal group form.

 

[kyle555]

What jimbo said. That's how many seconds it'll wait to receive a 1xx message better than 100 trying. Can be 183 Session Progess, etc