Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dial wait time in CM

Status
Not open for further replies.

TOPBAY

Programmer
Sep 29, 2014
65
AU
Hi friends,

Asterisk Example: Dial with 30 second timeout (default 45 sec)
same => n,Dial(SIP/1234567,30)

FreeSwitch Example: Dial with 30 second timeout (default 60 sec)
<action application="set" data="originate_timeout=30"/>

For CM, what is the default timeout in second and which parameter can you change?

Thanks for your help in advance!
 
I should have asked "what is default value of 180 Ringing timeout in sec?"
In Asterisk it keeps ringing 45 sec and sends CANCEL to end ringing. You can change by the parameter.
In FreeSwitch it is 60 sec by default. You can change by the parameter.
How about Avaya CM?
Thanks for your help !!
 
What jimbo said. That's how many seconds it'll wait to receive a 1xx message better than 100 trying. Can be 183 Session Progess, etc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top