Dial tone

[reimm]

Hi all,

After reinstalling server 1 & server 2 on mx-one TSE 3.2 all was working okay, except that the DIAL TONE was different compared to
the dial tone before the re-installation. All extensions (ANA, DIG, IP) on both server 1 and server 2 have this different kind of tone.
Can anyone know if there is a command to change the Dial tone?

Thanks.

Best regards,
reimm

 

[whosrdaddy]

Maybe you reinstalled without specifying the correct market?

Check with command: market_get -lim all

if the market is incorrect, you can set it with: market_set

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[reimm]

Thanks whosrdaddy for the reply...after market_set is initiated, is start and restart of the system necessary? will this restart affect the system ongoing calls? Thanks.

 

[whosrdaddy]

AFAIK, no restart is needed.
Be warned though, changing the market will reset your system parameters to the market default.
So before executing market_set, printout all system parameters with ASPAPARNUM=ALL; and save it.
After changing the market, reprint the system parameters and check against the backup.

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[reimm]

When initiating data_backup it does not continue..

MDSH> data_backup
Change of market data is not complete. Start and restart of the system is needed.

What should be done to make data_backup successful?

Thanks.

 

[whosrdaddy]

Mmm weird, this is not documented as such, anyway do what the MX-ONE tells you to do?

try first a start -system, if data_backup still fails then you will have to do a restart -system.

/Daddy

-----------------------------------------------------
Helping people is my job...