Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Department Group NEC SV9100 With SIP Phone 3

Status
Not open for further replies.

Liza R

Systems Engineer
Oct 30, 2019
52
ID
Hello all,

I have a question, is it possible if SIP Phone and analog phone are made in 1 department group?
because based on my test results, if SIP Phone and analog phone are made in 1 group, only the analog phone will ring when we call the extension pilot
Thank You
 
That is possible. Check again your programming.

 
Have you considered using a multi device group instead? MB 20-63 it has the added bonus that if a member of the group makes a call it uses the extension number of the pilot number and the pilot number shows as busy!
 
Thank you for your support and sugesstion,
After I did some tests, there is still a problem when making a call from a proprietary IP phone, only members with digital and analog extensions ring (the sip phone doesn't ring), but if i test call with digital extension all member ring (SIP Phone, digital, analog)
 
Yep, can confirm. I set this up in lab and Sv8100-SV9100 do NOT allow 3rd party SIP phone to work in a dept group.
 
Thanks...did you try to make a call using a proprietary IP phone for test?
 
by default program peer to peer is on, I had try but same result...If calling from IP Phone Proprietary to Department group (2 SIP Phone extension) just 1 extension ring. Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top