Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

denial event 1164 isdn call reject 1

Status
Not open for further replies.

Gspot

IS-IT--Management
Oct 29, 2002
2
US
I have two ISND-PRI T1's out in Las Vegas, NV. I will get a wave off coming from the PBX if a number is dialed that is not in service, etc. The wave off is received instead of a carrier recording stating this. I have never encountered this error before, does this have to do with the PBX programming or is this a carrier related issue? Prologix r11
 
So, as I take it, you've got no returned messages on your question. That's bad. I have the same problem here, in Moscow. And no one can help me or explain where I can find any information on the subject. What does it mean "denial event 1164" and how the problem can be fixed. Pls. let me know if you find out something new. Thanks
 
Guys

I have the same cause code. We have Worldcom looking into this I will let you know as soon as I have a response
 
Ok, Three cheers for Sprint for finally figuring it out! Only took a couple of months but...The cause of this is that there is a field in their translations that needs to be turned on for the trunk. The field is AUD RVA for audible recorded voice announcement. All they need to do is turn it on on the trunk and poof! the calls go through.
 
Hi All

Me also geting same type of issue, can someone help me out in this regard. System is definity G3R R11.
 
Hi all


Finally resolved the issue using an ISDN tester and a little configuration change at my local switch.


 
On March 31, Gaurav31dec said:

"Finally resolved the issue using an ISDN tester and a little configuration change at my local switch."

I have been struggling with the same problem for over two weeks. I would love to hear the configuration changes you made. Please call me at 504-561-6590 to discuss your solution because I don't regularly monitor this group.

ps. The receptionist here is not too sharp so if you don't get me the first try, PLEASE try again later.

Bob Simon
 
HI BOB

I gave u a call at ur office and left my cell number to the receptionist as u were away at that time. If u still need to discuss, u are most welcome. Give me Buzz and i will call u back.


Thanks
Gaurav
 
Gaurav,
Thank you for calling me last week. The phone number that the receptionist gave me rings fast busy -- perhaps she wrote it down wrong.

Unfortunately, the management here at Tek-Tips will not give me your email address, and they will not forward to you my email address. Please call me again or send me an email at the following address: bobsimon at mail dot com.

I'm sorry that this is becoming such a hassle. I'd really like to learn how you fixed your ISDN reject issue because I have the same problem.
Bob
 
In Russia there is a similar conference It’s in Russian of course, but many Russian specialists know English well enough to answer your questions. Here I’ve found the following information about denial event 1164.

denial event 1164: ISDN reject D2=DG/LOC/CV D1=0x830004 D2=0x111
User busy
denial event 1164: ISDN reject D2=DG/LOC/CV D1=0x830004 D2=0x110
Normal Call Clearing
denial event 1166: Abnormal ISDN drop D2=CV D1=0x830001 D2=0x1f
Normal, unspecified
denial event 1164: ISDN reject D2=DG/LOC/CV D1=0x830004 D2=0xf22
No circuit/channel available
denial event 1164: ISDN reject D2=DG/LOC/CV D1=0x83000a D2=0x1
Unassigned (unallocated) number

This information was very useful for me. May be it will help someone else.
 
I am also facing the same issue.

If anyone has details of a resolution please post here.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top