Definity IP issue

[skywalker3434]

I have an issue that has completely 'stumped' everyone I know. Here we go!

PBX 1-- IP 192.168.1.30/24
PBX 2-- IP 192.168.23.13/22
Report Server-- IP 192.168.23.230/22

PBX 1 can communicate with all IP's on the 23.0/22 network except the report server.
Report server can communicate with all IP's on the 1.0/24 network except PBX 1.

If I change the IP on Report server, it works. Are there any access-control-lists on the Definity that could be blocking the .230/22 IP?

Any thoughts?

thanks,
skywalker3434

 

[adscott]

Whats in between the subnets hardware wise? Routers and switches or a PIX firewall could all be blocking. I know occasionally in my network we block single IPs because of a virus and then forget to clean it up once the IP is reused. The fact that when you change the IP it works pretty much tells you its not a local firewall on your server or PBX. Has to be an ACL somewhere or a static route for that one IP going to the wrong place or cache that needs to be cleared on the switches. Good luck

 

[skywalker3434]

Adscott,
thanks for the help. We reset the clan board on the PBX and it worked. Since one of the node-names was hard coded to 23.230, it seemed to have caused an issue with network communication. Issue has been resolved!

Thanks for the advice.

skywalker