WrenBlaine
Technical User
My plant started up a little over a year ago. We didn't occupy offices for the first 8 months. The tech team that put in our communication system is no longer around, and we have floundered through much of the operation of our phones system by sifting through websites. We got Voicemail set up, extensions for everyone, lines internal/external, and our off hours message working. The one thing I know was set up that we cant seem to figure out is the paging system. There are speakers set up all over the plant and they are all tied in to one "extension" and no one knows how to use them.
We are using the Merlin we have MLX-10D in the offices and Operators is a MLX-28D. The Merlin set up has the processor, 2 (408 GS/LS-MLX) boards, 1 (008 MLX), 1 (012 with Ring Gen), and there is a amp for the P.A. system, which is a Bogen model TPU-100B with the plug going to #4 on one of the 408's. (8 plugs on bottom, 4 on top, 1 by itself, its in #4 of top set)
I have no idea how to get the phones in the offices to use the P.A. system which would be very usefull since the place is so dense no bodies cell phone works under the roof. Any suggestions on a typical default set up for dialing the P.A. or a possible process of elimination would be helpfull.
We are using the Merlin we have MLX-10D in the offices and Operators is a MLX-28D. The Merlin set up has the processor, 2 (408 GS/LS-MLX) boards, 1 (008 MLX), 1 (012 with Ring Gen), and there is a amp for the P.A. system, which is a Bogen model TPU-100B with the plug going to #4 on one of the 408's. (8 plugs on bottom, 4 on top, 1 by itself, its in #4 of top set)
I have no idea how to get the phones in the offices to use the P.A. system which would be very usefull since the place is so dense no bodies cell phone works under the roof. Any suggestions on a typical default set up for dialing the P.A. or a possible process of elimination would be helpfull.