Decrease "kbps" on IPLU

[bb34nne]

Hello to all!

Is there a way to change the size of the bandwidth usage on IPLU board? Now every call use 64kbps, in maximum usage on IPLU board, I need 2048kbps. So, my question is how(if possible)to decrease "kbps" per call?

I looked at Alex, but I have not found anything related to it. Also i used search here on forum, but I did not find answer.

If anyone knows the solution, thanks a lot!



<CNBIP:BPOS=1-0-30;

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-30 IPLU ROF1375067/2 R1A
CAA 158 0040 R3A EXE APPL
CAA 158 0037 R1C EXE KERNEL
CAA 158 0038 R1E EXE ROOTFS
CAA 158 0053 R2A EXE MSP
CAA 158 0046 R1A EXE INITRD
RYS 102 770 R1A EXE BOOT
RYS 102 777 R2B EXE FPGA
PCB CODE 2 EXE HW CODE 0
Mon Jan 29 2007 EXE 13:30:10

END

bb34nne

 

[rfpup]

Changing the codec used (in the configuration file of the IP phones) can decrease the bandwidth used per call.

You can monitor the codec used in a call via web browsing the IP phone at QoS values. (Suppose you use one IP phone for testing)

 

[bb34nne]

OK, thanks rfpup. I'll use ATA devices for connecting analog phones with IPLU board. I believe that there is an option on the ATA device, which can be configured.

bb34nne

 

[Yorkie9]

are you by any change referring to the DRG22 ata by any chance bb34nne?

If you are have a look in this forum as there has been some postings about these already.

 

[bb34nne]

No, Yorkie9, im not referring to DRG22 at this moment. For now, I will use Cisco 186 and Quintum AFG200. So to say, I hope to work with these devices, if it will work with IPLU board.

bb34nne