Debug port on IPLU (IPLF)

[vjimeneztenas]

Good afternoon,

I need to do debuging in one of my IPLU but I could'nt open the debug port in the IPLF, Alex says and I quote "Connection to the debug port is done via telnet (port=1500) and to access the Linux shell port 23 is used (telnet default port)" but port 1500 fails to open, does any one may know if that port still open for

<cnbip:bpos=1-2-20;

DEVICE BOARD REVISION INFORMATION
DATE: 07DEC09 TIME: 17:02:06

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-2-20 IPLU ROF1375067/2 R1A
CAA 158 0040 R5A EXE APPL
CAA 158 0037 R1C EXE KERNEL
CAA 158 0038 R1F EXE ROOTFS
CAA 158 0039 R2F EXE MSP
CAA 158 0046 R1A EXE INITRD
RYS 102 770 R1A EXE BOOT
RYS 102 777 R2B EXE FPGA
PCB CODE 2 EXE HW CODE 0
Mon Mar 16 2009 EXE 11:07:33

END

Thanks guys

 

[maxilee]

Hello.

also in ALEX you can find info :
"To be able to access the debug port following config params. should be added in file iplu.conf: [telnet_debug_port] 1500 "
and probably the you should restart IPLU board.

br
--
mark

 

[lindelott]

Hi everybody
the IPLU conection asm me login and password that I don't know,help please in alex I can't find