Hello,
I have an Option 11 that was powered down on the weekend. ON power up - everything came back except the analog card. In LD 32, i disabled the card then enabled. The TN's are programmed but there is no DT on the TN's.
How can i check if the card is bad?
Thanks.
I have an Option 11 that was powered down on the weekend. ON power up - everything came back except the analog card. In LD 32, i disabled the card then enabled. The TN's are programmed but there is no DT on the TN's.
How can i check if the card is bad?
Thanks.