DDI translation 3

[unitz]

Hi Everyone,

A basic question for some of you guys.
We are using Aastra MX-ONE PBX and was hoping to find a a way to translate or convert a DDI number to SIP destination (defined as as an external destination). So we have 4 digits coming in on the PRI and the external number is xxx-xxx-1367 and is currently pointing to an internal extension 1367 but would need to now be pointed to 1852 (defined as external destination in the PBX with route code 2 - IP/SIP trunk). Essentially route 2 is pointing to a external voice mail server. below is the output from the MX-ONE. Please let me know if you require any other information.

Thanks so much.

MDSH> number_conversion_print
Number conversion data:
Entry Cnvtyp Numtyp Rou Tardest Pre Trc Newtyp C ont Bcap Hlc
1112 1 10 xxxxxx1241 4
13 1 10 3 xxxxxx1241 4
19 1 10 3 xxxxxx1241 4
66 1 10 3 xxxxxx1241 4
MDSH>

 

[samsal]

I don't know if I got you right but yo may try the following:

- Keep the translation as is pointing to 1367
- Define 1367 as generic extension
- Make call_list for 1367 pointing to 21852 as first position.

 

[unitz]

Thank you samsal for your thoughts on it. Unfortunately we cannot delete internal extension 1367,as it is currently in use, and recreate it as a generic extension.
We would rather disassociate xxx-xxx-1367 DDI number from that 1367 internal extension and point that DDI number to 1852. Any way that can be done?

Thanks so much.

 

[snor]

Hi,
try following :

number_conversion_initiate
-entry 1367
-conversiontype 0 (Received B-number)
-numbertype 0 (Unknown public number)
-truncate 4
-pre 1852

(-route yy)

best regards,
Norbert

 

[unitz]

Thanks Norbert, that works perfectly.
Appreciate your help here.

Thanks so much!!

 

[himdp]

Hey unitz, you should consider giving the post by snor a star as a thank you.
Just a thought.

 

[unitz]

You bet himdp. I just did that