Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DDI translation 3

Status
Not open for further replies.

unitz

Vendor
Oct 15, 2014
4
CA
Hi Everyone,

A basic question for some of you guys.
We are using Aastra MX-ONE PBX and was hoping to find a a way to translate or convert a DDI number to SIP destination (defined as as an external destination). So we have 4 digits coming in on the PRI and the external number is xxx-xxx-1367 and is currently pointing to an internal extension 1367 but would need to now be pointed to 1852 (defined as external destination in the PBX with route code 2 - IP/SIP trunk). Essentially route 2 is pointing to a external voice mail server. below is the output from the MX-ONE. Please let me know if you require any other information.

Thanks so much. [hourglass] [bigears]

MDSH> number_conversion_print
Number conversion data:
Entry Cnvtyp Numtyp Rou Tardest Pre Trc Newtyp C ont Bcap Hlc
1112 1 10 xxxxxx1241 4
13 1 10 3 xxxxxx1241 4
19 1 10 3 xxxxxx1241 4
66 1 10 3 xxxxxx1241 4
MDSH>
 
I don't know if I got you right but yo may try the following:

- Keep the translation as is pointing to 1367
- Define 1367 as generic extension
- Make call_list for 1367 pointing to 21852 as first position.

 
Thank you samsal for your thoughts on it. Unfortunately we cannot delete internal extension 1367,as it is currently in use, and recreate it as a generic extension.
We would rather disassociate xxx-xxx-1367 DDI number from that 1367 internal extension and point that DDI number to 1852. Any way that can be done?

Thanks so much. [bigears]
 
Hi,
try following :

number_conversion_initiate
-entry 1367
-conversiontype 0 (Received B-number)
-numbertype 0 (Unknown public number)
-truncate 4
-pre 1852

(-route yy)

best regards,
Norbert
 
Thanks Norbert, that works perfectly.
Appreciate your help here.

Thanks so much!![2thumbsup]
 
Hey unitz, you should consider giving the post by snor a star as a thank you.
Just a thought.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top