Database Cleanup Digit Manipulation 1

[FunWithNortel]

I am currently cleaning up my RLIs and notice something weird on one of my NXXs. I need someone to enlighten me.

I have a NXX of 300 that uses an RLI that has no DMI referenced.

If I grab one of my PRIs directly via access code and dial 300xxxx it gets a reorder.

If I dial the same number utilizing AC1 9300xxxx it goes through.

If I access the PRI direct again via access code I can indeed dial the number via 10 digit dialing.

I am not sure why 300xxxx does not go through yet 9300xxxx does go through.

I thought the only digit manipulation on my end came from the dmi?

I notied when tracing the call if I direct access and dial 10 digit it says its National and if I use AC1 + 9300xxxx it says subscriber.

Thanks.

 

[Firebird Scrambler]

My advice is to use my conversion utility excel program which is available at

http://www.ghtrout.com/ghtrout/files/ConversionUtility(BARS-TNB-More)_by_DB.zip

Read the attached guide first as you need to capture the data in LD 86, LD 87 and LD 90.

It should help you trace all of your outgoing codes from your system.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[FunWithNortel]

Copy That ! Its been a blessing and has allowed me to get this far.

I trace the path and I see no digit manipulation going on. I'm stumped right now.

Thanks!

 

[johnpoole]

are you sure your dial the acod of the route used on your rlb? your right, that test shows that the owner of that number regects call type national.. no unheard of but strange never then less..

john poole
bellsouth business
columbia,sc

 

[FunWithNortel]

Copy that bro. I hit the ACOD and it wont go with 7 but via AC1 + 7 digits it goes. No DMI for the RLI 0. Not sure why it goes via AC1 + 7 and not ACOD + 7? I am so confused I thought DMI was the only way to manipulate the digits?

nxx being tested was in rli 1 but moved to rli 0
NXX 300
RLI 0
SDRR NONE
ITEI NONE

note: DMI was used in old RLI 1 but no longer used
DMI 1
DEL 0
ISPN NO
INST 1810
CTYP NCHG

note: RLI 0 no DMI
RLI 0
ENTR 0
LTER NO
ROUT 25
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 1
DMI 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ YES

note: RLI 1 used DMI 1 which inserted 1810
RLI 1
ENTR 0
LTER NO
ROUT 18
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 1
DMI 1
FCI 0
FSNI 0
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ YES

note:The PRI Circuit
TYPE RDB
CUST 00
ROUT 25
DES Main
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
CBCR NO
NCOS 0
SBN NO
PNI 00000
NCNA YES
NCRD NO
CHTY BCH
CPFXS YES
CPUB OFF
DAPC NO
BCOT 0
INTC NO
MBXR NO
DSEL 3VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH RRB
TRMB YES
STEP
ACOD xxxx
TCPP NO
PII YES
TARG 09 15
CLEN 1
BILN NO
OABS
INST
ICIS YES
TIMR ICF 512
OGF 256
EOD 2432
NRD 10112
DDL 70
ODT 1792
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
IENB 5
VSS 0
VGD 6
DRNG NO
CDR YES
INC YES
LAST NO
QREC NO
OAL YES
AIA YES
OAN YES
OPD YES
CDRX NO
NATL YES
VRAT NO
MUS YES
MRT 92
RACD NO
EQAR NO
OHQ NO
OHQT 00
TDET NO
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

Thanks.

 

[Firebird Scrambler]

I maybe missing the point of the original question as we only use SPN's in the UK, but I understand that 300xxxx doesn't work?. I'm assuming that this number is dialled without an access code and therefore would I be correct in thinking that an CDP entry is needed as well as the NXX code that is accessed via the AC1 "9" number?.

Another thing that might cause problems is TARG and TGAR settings as the route 25 has a TARG = 09 and 15. Any extensions with a TGAR of 9 or 15 won't be able to dial out across that route.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[FunWithNortel]

Copy that

Targ / TGAR ok
CDP not being used.

Its weird...AC1 + 300xxxx works
ACOD for Route 25 + 300xxxx does not work

But when you look at RLI 0 which uses Route 25 there is no digit manipulation / DMI so in essence dialing AC1 + 300xxxx should be the same as ACOD for route 25 + 300xxxx.

Yet AC1 goes through and ACOD 25 does not.

It has me stumped.

The only thing I have noticed is that when tracing the call if I direct access and dial 10 digit it says its National and if I use AC1 + 9300xxxx it says subscriber.

Thanks.