shawntoronto
Technical User
Now that I've gotten into the SDI Port, here is what's happening when I power up the unit.
It consistently cycles an OS RESTART - here is what keeps cycling.
------------
Communication Server 1000 Software
Release : x210450w
Created : Thu Jul 28 04:03:37 EDT 2005
Loaded : 0/0/00 0:00:00
Last Restart: 0/0/00 0:00:00
Current Time: 10/1/96 20:50:24
Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Initialize Network Interface.
*** OS RESTART ***
System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r11 dev2.54
Reset Reason: 80, 4 - Reset due to CP invoked reset
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10144953 type: NT_STD
System ID: 10144953
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:44:EE:23
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.
*** To invoke install setup program from PCMCIA enter CONTROL-I ***
Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.
*** OS RESTART ***
---------------
I've removed all cards except the SSC and it still does it.
Anyone have any suggestions?
It consistently cycles an OS RESTART - here is what keeps cycling.
------------
Communication Server 1000 Software
Release : x210450w
Created : Thu Jul 28 04:03:37 EDT 2005
Loaded : 0/0/00 0:00:00
Last Restart: 0/0/00 0:00:00
Current Time: 10/1/96 20:50:24
Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Initialize Network Interface.
*** OS RESTART ***
System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r11 dev2.54
Reset Reason: 80, 4 - Reset due to CP invoked reset
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10144953 type: NT_STD
System ID: 10144953
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:44:EE:23
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.
*** To invoke install setup program from PCMCIA enter CONTROL-I ***
Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.
*** OS RESTART ***
---------------
I've removed all cards except the SSC and it still does it.
Anyone have any suggestions?