Cycling *** OS RESTART *** 3

[shawntoronto]

Now that I've gotten into the SDI Port, here is what's happening when I power up the unit.

It consistently cycles an OS RESTART - here is what keeps cycling.

------------

Communication Server 1000 Software
Release : x210450w
Created : Thu Jul 28 04:03:37 EDT 2005
Loaded : 0/0/00 0:00:00
Last Restart: 0/0/00 0:00:00
Current Time: 10/1/96 20:50:24

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.


*** OS RESTART ***


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r11 dev2.54
Reset Reason: 80, 4 - Reset due to CP invoked reset
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10144953 type: NT_STD
System ID: 10144953
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:44:EE:23
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***

---------------

I've removed all cards except the SSC and it still does it.

Anyone have any suggestions?

 

[phonz1]

wow, so was what you saved all worth it??

 

[guycable2]

I bet Donor system means all the ISMs were transferred to a new PBX. The customer probably went to a CS1000e and got rid of the cabinet style system. We have decommisioned a couple of PBXs that way here.

 

[shawntoronto]

LOL - well, I'm only out $150 for the Cabinet, Power, 1 SSC card, 5 DLC cards, 1 Univ Tnk Card & 1 Anlg Trnk Card.

So it could have been worse.

Although, I don't learn very quickly so I'm looking for another 'pulled from a working system' SSC card.

Anyone care to talk me out of it?

 

[phones1]

your original problem looks like corrupt S ware DB, which ive sean 1000's of time with people power cycling them to reset clocking issues. To rectify this you could have done or pressed CNTL "b" when it gave you the promt of CNTL I. when you are in at this level you can run diagnostic test on the S ware DB Unfortunatkey if it doesnt fix it you can wipe the DB clean & re-install the Sware, but as you've mentioned you dont have the Key codes which you would need to complete such an install. To retrieve these in the UK would hae been reletively easy & wouldn't have cost a great amount, although you may have had to tell the odd white lie. The real lesson here is that when buying from ebay if you dont have a copy of the original licensing, you should have at least asked for a SLT print out this would have shown you your keycodes. ;-)

Remember if it doesn't work hit it harder

Scott UK

 

[shawntoronto]

Well I ran the Product Test and the Power Up tests and this is the result.

SYSTEM TEST MENU
-------------------------------
Enter 'p' for Production test
or 'd' for Daughter board test
or 't' for Troubleshoot
or 's' for System power up test
Return key to exit

pnter selection: p
LED ->PASS
Clock ->PASS
DRAM 32 Mb ->
-startaddr-20002000 stopaddr-22000000 ->PASS
SRAM ->PASS
68020 sram ->PASS
68020 ring buffer->PASS
68020 tone latch ->PASS
68020 cardlan register tests
CP-AUX data w/r ->PASS
CP-AUX secur w/r ->PASS
AUX-CP w/r ->PASS
CP-AUX stat w/r ->PASS
AUX-CP cntrl w/r ->PASS
68020 toneram ->PASS
tms320 dspram ->PASS
A31 ready intp ->PASS
A31 # 0 r/w ->PASS
N10-BO3 r/w tests main cab
N10-BO3 # 0 ->PASS
N10-BO3 # 1 ->PASS
N10-BO3 r/w tests exp cab 1
N10-BO3 # 2 ->PASS
A31 r/w expansion cab 1
A31 # 1 r/w ->PASS
N10-BO3 r/w tests exp cab 3
N10-BO3 # 4 ->PASS
A31 r/w expansion cab 3
A31 # 3 r/w ->PASS
N10-BO3 r/w tests exp cab 2
-no daughter board detected for cab 2
NOT TESTED
I44-A31 pattern loopback test main cab
CARD - 1 ->PASS
CARD - 2 ->PASS
CARD - 3 ->PASS
CARD - 4 ->PASS
CARD - 5 ->PASS
CARD - 6 ->PASS
CARD - 7 ->PASS
CARD - 8 ->PASS
CARD - 9 ->PASS
CARD - 10 ->PASS
I44-A31 pattern loopback test fiber expn 1
CARD - 1 ->PASS
CARD - 2 ->PASS
CARD - 3 ->PASS
CARD - 4 ->PASS
CARD - 5 ->PASS
CARD - 6 ->PASS
CARD - 7 ->PASS
CARD - 8 ->PASS
CARD - 9 ->PASS
CARD - 10 ->PASS
I44-A31 pattern loopback test fiber expn 1 second port
CARD - 1 ->PASS
CARD - 2 ->PASS
CARD - 3 ->PASS
CARD - 4 ->PASS
CARD - 5 ->PASS
CARD - 6 ->PASS
CARD - 7 ->PASS
CARD - 8 ->PASS
CARD - 9 ->PASS
CARD - 10 ->PASS
I44-A31 pattern loopback test fiber expn 2
-fiber daughter board 2 not detected
NOT TESTED
I44-A31 pattern loopback test fiber expn 2 second port
-second fiber port not detected
NOT TESTED
I44-A31 pattern loopback test backwards d/b
-backwards compatible D/B not detected
NOT TESTED
Testing 2Mb FLASH ALTBOOT on main board
Testing
Id check
Manufacture ID -> 10001
Device ID -> 22AB22AB
Erasing
Writing
maxtrys=5
Erasing
PASS
Testing FLASH drive D/B
-Checking for previous data
-Flash d/b is not blank
Enter y to erase and test: n
FAIL

---------------

SYSTEM TEST MENU
-------------------------------
Enter 'p' for Production test
or 'd' for Daughter board test
or 't' for Troubleshoot
or 's' for System power up test
Return key to exit

snter selection: s
Executing power up self tests
Clock ->PASS
QDRAM 32 Mb ->PASS
SRAM ->PASS
68020 sram ->PASS
68020 ring buffer->PASS
68020 tone latch ->PASS
68020 cardlan register tests
CP-AUX data w/r ->PASS
CP-AUX secur w/r ->PASS
AUX-CP w/r ->PASS
CP-AUX stat w/r ->PASS
AUX-CP cntrl w/r ->PASS
68020 toneram ->PASS
tms320 dspram ->PASS
A31 ready intp ->PASS
A31 # 0 r/w ->PASS
N10-BO3 r/w tests main cab
N10-BO3 # 0 ->PASS
N10-BO3 # 1 ->PASS
I44-A31 qpattern loopback test main cab
CARD - 1 ->PASS
CARD - 2 ->PASS
CARD - 3 ->PASS
CARD - 4 ->PASS
CARD - 5 ->PASS
CARD - 6 ->PASS
CARD - 7 ->PASS
CARD - 8 ->PASS
CARD - 9 ->PASS
CARD - 10 ->PASS
Power up self test passed


I also ran verious other tests and nothing came back as failed. The flash shows failed only because I didn't want toe erase the data.