CS1000 - Option 81C - Clocking not required for VOIP only service? 1

[olympus41]

We have just changed ALL of our inbound & outbound calls to go over our VOIP service. We are getting ready to submit a disconnect on our OLD (unused) PRI circuits. Before I submit the disconnect, I want to make sure it is ok that I set CLOCKING to FREE-RUN. Clocking is only required when you have PRI service, correct? This should not give any problems, correct?


Thank you,

Olympus41

 

[bhassell2000]

How are you dealing with 911 calls with no PSTN connections?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[olympus41]

bhassell2000,


We have numerous POTS lines that we are going to route 911 calls over.


Thank you,

Olympus41

 

[allenmac]

If you have no PRI connections, then I believe you also don't need the clock controllers, and can remove them.

My Test system is running with VoIP only connectivity with no Clocking information defined in the database.

 

[olympus41]

allenmac,


That is what I was thinking. Thank you for the information .


Thank you,

Olympus41

 

[trvlr1]

Why not run it for a day with everything turned off/unplugged before you order the disconnect, just to be sure?

 

[kstaff22]

this is common now with the VOIP boxes suppling the pri's. Either the switch or the voip box has to supply the clock. I trust the PBX over the box--so free run is correct. Make sure the VOIP box is set to clock off the PBX.

 

[olympus41]

So if I set both clock controllers to FREE RUN, that will allow the PBX to clock internally, correct?


Thank you,


Olympus41