I have an HA system Cppm CS w/5.5 I looked in the routes built for the system here is what I have:
Ld 137 prim elnk is 192.1.2.253
Route is built 192.1.2.0 is set to GW 192.1.2.253
OK
SCS Geo Rdun CS 10 miles away on same subnet is set:
Prim elnk is 192.1.2.250
Route is 192.1.2.0 going to GW 192.1.2.250
and
Route 0.0.0.0 going to GW 192.1.2.1
All the MGC's point to the 192.1.2.1 GW accross this flat 192.1.2 network.
Is this the best way to set the routes and does the fact that both call servers are not pointing to the same GW pose any issues?
Thanks for the input!
Ld 137 prim elnk is 192.1.2.253
Route is built 192.1.2.0 is set to GW 192.1.2.253
OK
SCS Geo Rdun CS 10 miles away on same subnet is set:
Prim elnk is 192.1.2.250
Route is 192.1.2.0 going to GW 192.1.2.250
and
Route 0.0.0.0 going to GW 192.1.2.1
All the MGC's point to the 192.1.2.1 GW accross this flat 192.1.2 network.
Is this the best way to set the routes and does the fact that both call servers are not pointing to the same GW pose any issues?
Thanks for the input!